Starbond Super Glue Remover, Dissolves Adhesive, CA Glue Debonder, Easy Brush Cap Applicator, 2 oz

So what happened was, my brand new car got super glue on the third row seat, the backside of it, my daughter was using it as a table, nearly the entire bottle spilled. I was devastated, haven’t even made a payment on this car. Either way, I used acetone for 3 hours attempting to get this crap out, went online bought this stuff. Waited 4 days to get it, read all the reviews about how it didn’t work, well, I have spend another two hours using this stuff and it looks better the I could have ever gotten it to look with acetone. I would have to say this stuff works great for at least removing the super glue from the backside of my seat. I did use my mini shampooer, I also used a little scrapper but not to scrape more to rub it in, I also applied it 4 times and waited 20 mins each time. It was a time consuming process but it definitely worth it considering it’s my brand new car. I believe if I had this first it would have looked much better but the acetone damaged the carpet prior so it’s kinda bald ish, I’m sure the super glue also burned it. Either way it looks way better. I wish I took better photos dead on it but I was two upset. So I’m showing it was an entire bottle of super glue almost, the size of bottle because everyone says it’s small but it goes a long way, and my scrapper tool. The only before photo is the white looking spot of course but you can tell the difference the two photos are similar are same angles and now you wouldn’t know unless I told you

This product did EXACTLY what it says that it does! I am SO IMPRESSED with how great this stuff works! I had some super glue residue on a delicate piece of carbon fiber dash trim in my expensive Corvette & I saw this stuff on amazon & thought I would give it a try (even though I was skeptical about if it would actually work) & I just put a small amount on the spots of super glue residue & then I wiped it off & to my amazement the super glue COMPLETELY came off & did not even leave any spots or marks on the carbon fiber pieces! They now look BRAND NEW! I will definitely use this stuff again if I ever need it! THIS STUFF WORKS! It saved me from having to purchase new expensive dash trim pieces! AWESOME STUFF!

This works well. I've been using more super glue with my 3d printed projects, and this has solved my problem with getting the glue all over my fingers. I've tried the acetone with little success, but this is able to remove the super glue quickly and leaves very little residue. Its a great value for the money.

The media could not be loaded. I feel like this product does a really great job at removing small bits of super glue, but it didn't fully work in my case. Maybe if it was on a more solid less porous surface it would have worked better.I accidentally dripped some super glue (Cyafixed medium thin industrial general purpose adhesive) between my legs when I was trying to glue something up, while seated at my desk. I have a synthetic leather gaming chair. The super glue that I use is pretty fast drying, so while I was trying to get it off my hands I hadn't noticed the small blob on my chair as well. When I did notice it, about 20 seconds later, it was pretty much already setting up. I wiped up as much as I could but it wasn't good enough. I got the glue on my hands, my lighter, the part, and my chair. It was a mess! After trying to manually remove the glue from my chrome-coated lighter and failing miserably, to the point of causing damage to the finish, I decided to look up and see if there were chemicals to perform essentially dissolving of the glue. I found that this product was highly recommended by several people in varying industries - mostly in 3D printing.To start, I applied Starbond to my chair. I took video of the whole process, to see it start-to-finish. The chair can be seen with 2 small drops of super glue adhered to the surface of the synthetic leather. After applying the Starbond, the glue still wasn't removed. But, also now was an additional lump on the chair in the shape of an asymmetrical oval around the effected area. It's very clearly evident that the Starbond either soaked thru the leather pores and into the foam padding of the chair, OR, de-bonded whatever chemical make-up the chair cushion had to hold itself together, like a bad chemical reaction. With the super glue still remaining firmly on top of the synthetic leather, I opted to continue and re-try removal. The additional removal processes all resulted in failure. They did lessen the volume of the top-most material, and smoothed out the tops to a dome-like shape, but the substance as a whole remained present and is still visible to this day, as well as the new defect if the chair cushion surface.After each removal of the prior application of Starbond the surfaces were cleaned with IPA to reduce the effect that they'd continue to stay active on the surface and possibly cause a skin irritant.Next, I attempted removal of the super glue from my Zippo lighter. The lighter from my failed manual rough removal resulted in scratches being present on the surface. After applying Starbond the first time, the results were dramatic. It reduced the super glue size from an area about the size of a fingernail to an area about as big as a grain of rice. Then I followed up with additional layers of Starbond, and eventually the super glue was fully removed. Sadly, I'll have to get the lighter re-coated, due to my own mistakes, but at least the super glue is now fully removed, and that process can take place.In short - Starbond is a great product that appears, to me, to work well on hard non-porous surfaces like metal. From my experience here, I wouldn't recommend its use on non-porous objects like clothing and furniture - however, some other people may say differently based on their experiences.

I tried to use this to remove kiss brand false nail glue. It should have worked since the nail glue has cyanoacrylate in it. However, even after letting it sit 10-15 minutes and working it under the nail, it did nothing. I went back to using Glamnetic oil. Don’t know if I got a bad batch or if it just doesn’t work on that type of glue?I upgraded my review to 5 stars for the excellent customer service. The company reached out to me and offered a refund. It’s refreshing to see a business stand behind their product.

Bottle so small thinking be a 12oz bottle but not enough to cover all areas so just to improver services increase larger portion size. And didn’t work like I thought it supposed too

Works great, My daughter spilled nail glue on my vinyl sink and hardwood floors. You have to let it sit, but it will come off.

Have tried several solutions to remove set cyanoacrylate without results. Had ber high hopes but pretty expensive for such a small bottle. Applied 3 times following instructions each time and did nothing. Had high hopes this would resolve my issue but nada.Bummer. Don't think id recommend this based on my experience. Sirey