Mohawk Quick Fill Burn-in Stick - Interior Maple Laminate

This was great and really cut down my heavy lifting. Otherwise I would have had to fill all the little cracks with epoxy and that would of been a nightmare. This worked great and created a very natural finish

Used a wood burning tool on low setting to drip in nail holes in our "Bourbon" colored Home Depot solid oak flooring. The "True Brown" color matched perfectly.You can't see the nail holes unless you bend over.

I purchased the Burn In Stick because I have a fairly deep scratch on a table top courtesy of my dog. I tried to fill it with a soft fill stick but was not happy with the result so I read the reviews on the Burn In Sticks and thought it would do a better job of filling the scratch.....I was wrong.I tried the Drip method where I heated up the end and dripped the material into the scratch so that it filled the space and created a nice dome of material over the area. I waited for it to cool and took a plastic scrapper to level it off and the material broke apart like plastic and let the scratch exactly as it was before....None of the Burn In material adhered to the scratch. Then I tried to heat the end of the stick and Rub it into the scratch thinking that this would work the material deeper into the scratch. I made sure that I have covered the entire area and created another mound over the scratch. Left it to cool....Used the scraper and.....Same result. All of the material came out of the scratch leaving it as empty as before. Either I am doing something wrong or we have magical Teflon coated wood on the table but this product did not work as advertised.

A little to pricey for a small stick that doesn’t go very far

Looked easier on the video to build up a thick enough fill to be flush with top. I used it on a chipped Formica repair.

I needed to use this to repair large dent into the top of a high gloss desk. This burn stick did the trick but I had a hard time getting the hole level with this filler....couldn't sand due to the type of finish. But it did work OK

I had a deep gouge in a light colored piece of hickory. It's hard to find a good match for color, but this works (needed some graining touch ups afterwards). More importantly, this is much easier to use the traditional burn in sticks. No burn in knife needed. Any heat source will work. (I used a culinary torch). And no special leveling tools needed. An old credit card with gentle along-the-scratch scraping works.By comparison, this product is sturdier than a filler stick (bec it is quite hard when not heated) and also flows better than a fillter stick (once heated) to get into narrow cracks. For these benefits, it is only slightly more effort, requiring heating.

Repaired a small dent. Melted it into the dent and scraped it even with a credit card. Can't even see the repair now.

Fatal creí que compraría todos los colores juntos súper caro !!!

The Good:- This product works with semi satin, or satin finished floor finish.- The color match was pretty spot on with my "chocolate" Walnut stained floor, as the grain of the wood absorbs stain in varying hues, so the Extra Dark Walnut Fill Stick blends in perfectly.- It's easy to use, if you set yourself up for success. I used a Heat gun, and an old credit card. Heat to the stick to soften it up (or for deeper fills, heat to a liquid to fill in), apply, let cool lightly and then scrape off with Credit Card. Any residue can be buffed off with a cotton rag.The Bad- You use up a lot more product than what gets actually filled in. So don't think a stick lasts that long.Overall, I'm not sure how long this product will last. The finish and result is spot on (as long as you color match to your wood).

I used this on an epoxy resin project on driftwood, it filled in the pin holes after the first coat was sanded. I didn’t like that some of the product would come back out of the hole when I scraped it with a razor to get it flat. So I had to reapply. Otherwise it worked great.

The stick worked really well filling holes in my terrible wood floors. It worked so well I didn't have to replace the floor. Whew.

Ordered this to fill some Maple shelves and it does not work well. It also leaves a plastic looking finish which seems like it has oil in it because it leaves a big oil stain around the filled area that does not send off easily and in some places not at all