Deliver to UAE
IFor best experience Get the App
AZDelivery CP2102 HW-598 USB to TTL 5PIN Serial Converter Adapter Module Downloader 3.3V 5V UART STC with Jumper Wire Cable Including E-Book!
Description
- ✅ Reliable USB serial adapter with CP2102 chipset. For easy connection to all common microcontrollers with 3.3V and 5V.
- ✅ The CP2102/9 is a highly-integrated USB-to-UART Bridge Controller providing a simple solution for updating RS-232 designs to USB using a minimum of components and PCB space
- ✅ Even small deviations in timing or electrical specifications will not cause this converter to fail! Compatible with most applications and microcontrollers such as ESP8266, ESP32 and STM32
- ✅ Chipset is also suitable for higher data rates, it was used for the ESP32-Dev-Kit and the NodeMCU Amica V2 module, among others.
- ✅ This product includes an E-Book that provides useful information on how to begin your project, it helps with a quick setup and saves time on the configuration process. We provide an array of application examples, full installation guides and libraries.
Full description not available
Reviews
A**R
All good, but missing basic instructions...
Arrived as promised.Board comes covered with transparent heat shrink plastic to protect it from short circuits which is good.Seller sent out lots of spec sheets attached to the dispatch confirmation email which is helpful, but these didn't say anything about how to use it.To save you some time, here is the missing info on using this USB converter with the 6 pins on the end of the Arduino (I am using a Pro Mini)...1) Use only one of the 3V3 or 5V pins to connect to the Arduino VCC pin (to match your Arduino voltage) and Gnd goes to Gnd on both.2) Swap TX and RX leads between USB board and Arduino (TXD goes to RXI, and RXD goes to TXO)3) This board lacks a DTR pin, so when programming your Arduino, if your PC just sits with "Uploading" message, then next time press the reset button on the Arduino as soon as the red LED on the USB board comes on.Once I figured the lead swapping and reset button pressing, everything seems to work well.
A**T
Works without problems on Windows 10
Good cheap board that works without problems (unlike a lot of the FDTI fakes that I've had in the past). The only criticism I have is that the mechanical mounting of the USB plug is weak and is just relying on the electrical contacts. This can be fixed by soldering down the two mounting lugs that are on either side of the plug - I do this on every board I get now. I like it so much that I've ordered 30 in total - at that price you can't go wrong or have enough of them knocking around.
M**H
Brought a camera back to life
Excellent product - I had a dead Neos Smartcam but with one of these and lots of info from the web I was able to reflash the firmware and now camera works again - happy!
R**B
RIP off !
The picture shows 2 items so does the description. I received one item then wrote to them asking for the missing 2 nd item.Never heard back, nor there was a way to return the item.Rip-off don’t buy from them.
R**T
Superb Value
Works well and are doing the job I got them for. No problem connecting at either end, the set of flying leads supplied with the converter were just the job. Great customer service.
R**H
done the job
Worked ok but only 2 in box not 3
S**T
Awful, overheat and break really easily
One board overheated and broke as soon as i plugged it in, the second worked for about 2 hours then did exactly the same thing. I will be buying more but definitely not these ones
O**O
Good cheap programmer what more could you want
Great little programmer, no problems everything you need. And theres two!
Common Questions
Trustpilot
2 weeks ago
1 day ago
